Log in





Remember Your Bow String – Maintenance

March 4th, 2010 by admin

There is a more to archery than shooting a bow and arrow; you must know how to do proper maintenance as well. Taking care of your archery bows will ensure years of worry free operations. There are several things to keep an eye on when it comes to your bow, and the bowstring is one of the most often overlooked.

The String

The bowstring joins the two ends of the bow and is responsible for setting your arrow into flight. String is made of many different materials depending on when your bow was manufactured and where. The most common materials include sinew, linen, hemp, rawhide and more. Good bowstring will be strong but flexible and resistant to the elements.

Treating the Bowstring

String wax is a very important accessory for taking care of your archery equipment. A good wax coating helps the string remain waterproof and increases flexibility and as you will recall these are two important qualities of any bowstring. String wax is not very expensive and can be purchased at an archery shop or various online retailers.

How often you wax your archery bows will depend largely on how often you shoot. Naturally, the more you shoot the more often you will need to use your string wax. If you should begin to see any signs fraying or wear, it is definitely time to wax your archery bows.

Other Maintenance Issues

While string wax is an essential part of maintaining your equipment, it is not the only thing you need to keep an eye on. Bowstrings are made of several smaller strings wrapped together in a precise manner, this wrapping can become loose in spots and if left unattended can result in needing to have the bow completely restrung. Before this happens, you can have the bowstring serviced.

Some people have the equipment and ability to do this themselves, however if need be a repair shop can do it for you for a reasonable price. The area around your cams will require a bow press and not everyone has this piece of equipment lying around.

Signs something is wrong

It is easy to tell that you have not used the string wax enough or something else has gone wrong when the string frays or breaks. However, this can take some time depending on the type of string you have. If you would like to service your archery bows before catastrophic failure occurs, you should know some of the typical early signs of a string problem.

When you draw your bow back and the length does not feel quite right, your bowstring may have stretched or is wearing thin in a hidden area. Keep an eye on your draw length so that you know when to have the equipment checked out. Fixing this issue often requires a bow press, so again, you may need to speak to a repair shop.

Erratic arrow flight is another sign that something could be wrong with your bowstring or cams. When you begin noticing a problem, you should have your archery bows checked out. If you wait, many times problems will escalate costing you more money.

Conclusion

String wax can be an archer’s best friend when used appropriately. Archery equipment is expensive and you want to ensure that you get the maximum life span out of each piece, so be proactive. Watch for problems with strings, limbs and cams. Prevention is much better than cure! ;)

Archery Bow String Care

Archery Bow String Care

Post to Twitter

Why Do I Need An Archery Bow Stabilizer?

February 25th, 2010 by admin

With all the archery equipment you have already purchased you may be wondering why you would need a bow stabilizer. As the name suggests the primary function is to create a stable platform from which you shoot your arrows. The better balanced and stable your archery bows, the truer your arrows will fly, and that is what archery is all about. To fully understand why, you must first know what a stabilizer is and how it works with your archery bows.

What

Stabilizers are made of many different materials. Rubber, metal, plastic and carbon are all common materials used in a bow stabilizer. In the past, bow stabilizers were often completely metal, which added significant weight to the bow. You do not want nor need a lot of added weight, so today carbon and other materials are more common. The final addition to the bow stabilizer is a small weight at the very end.

Stabilizer Job

Decreasing the weight and adding other materials to a bow stabilizer has made them more effective at their job, which is to stabilize your bow and absorb shock from releasing the arrow. When you fire an arrow, there is a certain amount of recoil, if you will, which can be noisy not to mention hard on your archery bows. For this part of the job, manufacturers have found a way to incorporate rubber shock absorbers into the bow stabilizer.

To recap: Your bow stabilizer is responsible for two things, absorbing shock from arrow release and balancing your bow for better accuracy. Now, many hunters feel that their bow is too advanced to require a stabilizer bar, however the truth is every bow should have one. Regardless of how smooth and quiet your bow is, it will always make some noise, which is why you should have a stabilizer.

Choosing

Too often hunters and target shooters take the first stabilizer they pick up, which is a mistake. You will want to choose your stabilizer in much the same manner you do all of your archery equipment. You choose equipment based on its purpose and the same goes for a stabilizer.

Bow stabilizers can be small and compact or very long, competition archers typically use the longer stabilizers for increased accuracy while bow hunters who are trekking through the woods typically choose a shorter model. For the average hunting bow, your stabilizer does not need to be less than four inches nor more than ten, anywhere in between is fine.

Final Thoughts

If you are still undecided about the benefits of a bow stabilizer on your archery bows, you might want to consider a few facts. Professional archers use a stabilizer and they can pick a quarter off at 80 yards. Even if you are not planning to make such a daring shot isn’t it wise to have the best accuracy possible. Bow hunting is an extreme event and hunters owe it to the animals to make a quick, clean kill every time. Any amount of noise can spook your prey and when that happens your arrow does not land where you intended. An archery bow stabilizer could make all the difference. ;)

Archery Bow Stabilizers

Archery Bow Stabilizers

Post to Twitter

Are Archery Quivers Necessary?

February 20th, 2010 by admin

If you are new to bow hunting you may be wondering, where you can cut a few corners on the expense and have probably asked yourself if archery quivers are actually necessary. The short answer is yes, they are very important. The one fact you will have to come to terms with is that archery is not a cheap pursuit. Broad heads, bows, practice tips and arrows can quickly become expensive but the answer is not to skimp on the quiver. When you need to save money, you can be more careful with your arrows during practice, so that you can reuse them or make your own targets.

Purpose

The main purpose of archery quivers is to protect your arrows and allow you to carry more than one to the tree stand or hunting area with you. That being said there are many varieties for you to choose from and each will largely depend on your habits.

The Great Hunter

Some people are only hunting for the sport and desire the perfect specimen to mount on their walls. For this type of hunter there will be many days spent tracking the perfect animal and fewer opportunities to shoot.  When you are looking to score a monster buck, you will be well served by a quiver that holds just a few arrows and will likely prefer a hip mounted quiver for your archery equipment.

Hungry Man

Another variety of hunter is the person with a deep freeze to fill! This hunter has one thing on the brain, bag as many legal animals as possible for the day. When you are hunting for meat, you will want a quiver that holds as many arrows as possible. The more arrows you have the better your chances for meeting the days quota of kills. Probably the best type of archery quivers in this situation is the over the back type. These will generally hold the largest number of arrows and be out of the way when you need to take a shot.

Casual Open Plains Hunter

Many hunters fall in between these two extremes and simply like to casually hunt. Mounted archery quivers are a good choice in this situation if you are hunting in grassy areas or from a stand of some sort. When your arrows are attached to your bow they can get snagged on low lying brush which will damage them and cause a good deal of noise, neither of which will bode well for the days hunt.

Conclusion

There are many archery quivers to choose from, above are some of the most common types you will come across. Within these main types, there will be different sizes, colors and shapes, this archery equipment is made of various materials and some even have optional storage for extra arrow tips and more. Among the many archery quivers on the market today you should be able to find one that fits into your hunting style and budget. ;)

Traditional Archery Quiver

Traditional Archery Quiver

Post to Twitter